Slot Machine Noises

by John Robison
Do the slot machines on the ends of aisles pay better than the machines in the middle? How about the machines near the table games? They’retight, right? And are the machines near the coin redemption booths loose? Join us on our journey for finding loose slot machines.
The loose slot machine is the slot player’s Holy Grail. Much as King Arthur’s Knights of the Round Table searched Britain for the Holy Grail of myth, slot players search casinos for loosemachines. Slot players have formulated many theories about where casinos place their loose machines to aid them in their quest.

Before we can figure out where the loose machines are, we have to figure out what they are. There is no U.S.D.A. system for grading the looseness of machines and no national orinternational standard that determines whether a machine is tight or loose.

• Slot Machine Noise Cling
• Slot Machine Sfx
• Slot Machine Noises
• Free Slot Machine Sounds
• Slot Machine Sounds

So, what is a loose slot machine?

Thanks for Watching HUGE WINS! I PLAY EVERY QUICK HIT SLOT MACHINE IN THE CASINO! Winning W/ SDGuy1234! Download: Credit: 1 - intro music: Big Horns Intro performs Audionautix with a Creative Commons Attribution license (https://creativ.

Say we have two 94% payback machines. Are they loose? I bet some people say yes and some say no. Why isn’t there agreement? Let me add a little more information to thescenario to see if it gives you an idea of why one person calls a 94% payback machine loose and another calls it tight. What if I told you that one machine was a nickel machine and theother a dollar machine? For most people who play nickel machines, a 94% machine is among the best-paying machines in their area. For most people who play dollar machines, on theother hand, a 94% machine is among the worst-paying machines in their area. The person who called 94% loose probably plays lower-denomination machines, while the person who called 94%tight probably plays higher-denomination machines.
Let me add one more piece of information. The dollar machine is a video poker machine. Dollar video poker players would rather have root canals onall their teeth with no anesthesia while their fingernails and toenails are ripped off than play a 94% payback machine. They have many adjectives for a 94% payback machine, but loose isnot one of them.
You see, loose isn’t an absolute. Looseness depends on your frame of reference. Looseness is actually a comparison. We shouldn’t say “loose.” We should really say“looser”. We should really be asking where the looser machines are. But let’s bow to common usage and continue using the term loose machine.

So, what is a loose machine?

Quite simply, a loose machine is a machine that has a higher long-term payback percentage than another machine. The loose machines in acasino are those machines that have the highest paybacks. These are the machines that will take the smallest bites out of your bankroll in the long run. No wonder slot players areconstantly searching for them.
Over the years, players have developed a number of theories about finding loose slot machines. Casinos place loose machines near the entrances, for example, so passersby can see playerswinning and are enticed to enter the casino and try their luck. The loose machines are also at the ends of the aisles to draw players into the aisle, where the tight machinesare.
And, of course, a loose machine is always surrounded by tight machines. You never have two loose machines side by side. That’s done for players who like to play more than onemachine at a time. If they should happen to stumble upon one of the loose machines, they’ll be pumping their winnings from it into the tight machines around it.
More theories. The machines near the table games are tight because table games players don’t want to hear a lot of bells and buzzers going off and happy slot players whooping it up aftera big win. Another reason the machines near the table games are tight is because table games players will occasionally drop a few coins into a slot machine and they don’t expect to winanything, so why give them a high payback.
Similarly, the machines near the buffet and show lines are tight. People waiting in line are just killing time and getting rid of their spare change. They’re not going to play for along time or develop a relationship with those machines, so the machines can be like piggy banks – for the casino! Money goes in and rarely comes back out.
The machines near the coin redemption booths, on the other hand, are loose. Players waiting in line for coin redemption are slot players and the casino wants them to see other playerswinning. Seeing all those players winning will make them anxious to get back on the slot floor to try their luck again.
Finally, finding loose machines in highly visible locations is most likely. Again, casinos want players to see players winning and be enticed into trying to get a piece of the casino’sbankroll themselves.
These are the theories I can think of off the top of my head. Maybe you know of some others. Most of the theories have a basis in psychology. When we see others winning, we’llwant to play too because 1) we’re greedy, 2) we’re envious, or 3) we see that at least some machines really do pay off and if we keep trying we might find one too.
Based on my own discussions with slot directors, interviews with slot directors, and seminars I’ve attended, I don’t think these theories are relevant in today’s slot world. To see why,we have to look at how slot machines and slot floors have changed.
Picture a slot floor of 10-20 years ago. Even if you don’t go back that far, I’m sure you’ve seen pictures on TV or in books. The slot machines on a casino floor in that era arearranged in long rows, much like products out for sale in a supermarket aisle. There’s no imagination used in placing the machines on the floor. The machines are placed using cold,mechanical precision.
On page 193 in Slot Machines: A Pictorial History of the First 100 Years by Marshall Fey, there’s a great picture of Bally’s casino floor in Atlantic City that illustrates my point. Thepicture shows hundreds of slot machines all lined up in perfect rows like little soldiers. The caption reads, “Like a Nebraska cornfield, rows upon rows of Bally slots extend as far asthe eye can see.”

Try an online casino for FREE. We have over 15 No Deposit Bonus Codes. No credit card needed, just sign up and startplaying!
Compare that image with the slot floor layout at a casino that was designed in the last five or so years. Studies have shown that players feel very uncomfortable playing in longaisles. They feel trapped when they’re playing in the middle of a long aisle, particularly if the casino is crowded. As a result, modern casinos have shorter aisles and when a long aislecan’t be avoided, it will be wider than others so players won’t feel like they can’t get out.
One of the finding loose machines theories has casinos placing loose machines at the ends of aisles to draw people into the aisles. Having shorter aisles means having more machinesat the ends of those aisles. Can all of these machines be loose?
In addition to being uncomfortable in long aisles, players are also uncomfortable being put out on display for the other players. Perhaps they feel like they might become a target iftheir good luck is too visible.
One slot director I heard speak said that he tried to create “comfortable niches” for his players. Instead of being in a fish bowl, visible to most of the slot floor, players in hisniches can be easily seen by only the other players in that niche.
Another theory about loose machine placement is that casinos place them in highly visible areas. Modern casinos still have highly visible areas, but the areas are visible to a smallernumber of players. A loose machine in this area will influence fewer players than before.
The last change in the slot floor that I want to mention is perhaps the biggest change of all. Casinos used to have hundreds of slot machines. Now they have thousands. Oneslot director in Las Vegas said in an interview a few years ago that with so many machines on his floor, he didn’t have time to micro-manage them. He and his management decided the holdpercentage they wanted for each denomination and he ordered payback programs close to that percentage for his machines. Furthermore, he said this was the common practice in LasVegas.
As much as the slot floor has changed, the changes on the floor are dwarfed by the changes in the slot machines themselves. One thing that struck me about that picture of Bally’s is howall the machines look alike. They really do look like soldiers being inspecting, all standing at attention and in identical uniforms, or like rows of indistinguishable corn plants. In fact, it looks like there are only three different games in the 10 machines in the first row in the picture. Granted, the majority of the machines in Bally’s casino were Ballymachines. Still I’m surprised by the lack of variety in the machines in the front row in the picture.
I heard that one theory why Americans have gotten heavier is that we have access to a wider variety of foods today than we had before. When meals consisted of the same thing time aftertime, it was easy to pass up second helpings of gruel and eat just enough to no longer be hungry. But now we have Chinese one night, Mexican the next, followed by Thai, burgers, pizza,and pasta -- it’s easy to overeat on our culinary trip around the world.
Just as variety in food creates desire, so does variety in slot machines. “Hey, I used to watch The Munsters all the time. I’ll try that machine.” “I never miss TheApprentice. I’ll give that machine a go.” “I played Monopoly all the time as a kid.” “I have a cat and a dog and a chainsaw and a toaster.”
Not only is there more variety in themes on machines, there’s also more variety in paytables. Back in the 1920s, a revolutionary change in slot machine design was paying an extra coin fora certain combination. Adding a hopper to the machine in the electro-mechanical era made it possible for the machine to pay larger jackpots itself instead of requiring a handpay from ajackpot girl. Adding a computer to the slot machine made it possible for today’s machines to pay modest jackpots of a few thousand coins all the way up to life-changing jackpots ofmillions of dollars.
The computer also makes it possible to add more gimmicks to machines. Gimmicks like “spin-til-you win,” symbols that nudge up or down to the payline, haywire repeat-pays, and double spinall add more variety and interest to the games.
Today’s machines are immeasurably more interesting and fun to play than those of even just a decade ago. Each new generation of machines has crisper graphics and better sound than theprior generation. Slot designers are working overtime to devise compelling bonus rounds that will keep players playing for just one more crack at the round. How many people playingWheel of Fortune are trying to win the jackpot? Not many. Most people keep playing to get one more spin of the wheel.
Slot directors today don’t need to pepper their slot floors with loose machines to stimulate play. Today’s machines themselves generate more desire to play than seeing a player doingwell.
Now I'll finish our discussion of where slot directors place loose machines with some additional thoughts, with a few anecdotes I've heard at slot seminars, and with what I think will be thefinal nail in the coffin of loose machine placement philosophies.
One of the placement theories says that tight machines should be placed near the table games because the table games players don’t like a lot of noise while they’re playing. Have the peopleputting forth this theory ever been near a craps table? A craps table with a shooter on a hot roll has to be one of the loudest places -- if not the loudest place -- in the casino. Crapsplayers can be a boisterous lot even when the table isn’t hot. Okay, I can see players needing peace and quiet at blackjack tables (It’s difficult to count cards even in a quiet casino.), butnot at craps, roulette, Let It Ride, and other tables. In any case, the casino can adjust the volume level on a machine. The slot director can put a very quiet, loose machine near the tablesand not disturb a single table games player.
Another problem with following a loose machine placement philosophy is that it limits the flexibility slot directors have in moving their machines around on the slot floor. If the directors aregoing to give up a little bit in payback on some machines, they certainly will want to get their money’s worth and ensure that these machines are in locations where they’ll be played, be seenbeing played, and entice other players to play. Slot floors have only a limited number of high visibility areas. Slot directors won’t want to waste any of their high-paying machines in the morenumerous less visible areas, where the machines won’t be encouraging other players.
Now I’d like to share some anecdotes I’ve heard at panel discussions during the big gaming show (first the World Gaming Congress, then the Global Gaming Expo) that’s held in Las Vegas eachyear.
First, one slot director described an experiment he conducted in his casino. He had a carousel of 5 Times Pay machines that all had the same long-term payback. He ordered new chips to lower thepayback percentages on a couple of the machines to see if anyone would notice. The machines with the lower long-term paybacks received just as much play as the higher-paying machines. Noplayer, furthermore, ever complained that some of the machines in the carousel were tighter than others.
In another seminar, a slot director shared the philosophy he used to place some machines that he had inherited from another property. These machines, he said, had lower long-term paybacks thanthe payback he usually ordered for machines on his slot floor. He said, 'I read the same books that the players read. I put these lower payback machines in the spots that the books said shouldhave the high payback machines.'
My last anecdote is about a decision made by the slot director at the MGM Grand in Las Vegas many years ago. He was ordering 10 Times Pay machines for his slot floor and he was concerned aboutthe low hit frequencies available for those machines. (Machines with multiplying symbols tend to have low hit frequencies, and usually the higher the multiplier, the lower the hit frequency.)The slot director was afraid that his players would think the machines were very tight because they hit so infrequently. He said that he ordered higher paybacks than he usually does for thosemachines in an attempt to offset the low hit frequency. The machines would still have a low hit frequency, but at least the average value of a hit would be a little higher than if he hadordered a payback percentage nearer the percentage he usually ordered. He hoped that would be enough to keep his players from thinking these were tighter than the other machines on his slotfloor.
Although I think these anecdotes are the exceptions that prove the rule that some casinos at least order the same long-term paybacks for machines of a particular denomination, there is evidencethat some casinos may not. In the first edition of Casino Operations Management, for example, Kilby and Fox list a number of “general philosophies that influence specific slot placement”including: “low hold (loose) machines should be placed in busy walkways to create an atmosphere of activity” and “loose machines are normally placed at the beginning and end of trafficpatterns.”
They then say that “high hit frequency machines located around the casino pit area will create an atmosphere of slot activity.” I’m not sure whether they’re saying high hit frequencyshould or shouldn’t be placed near the pit. In any case, note that one philosophy said that loose machines create an atmosphere of activity and another said that high hit frequency machinesalso create an atmosphere of activity. This is the perfect segue into what I think puts the final nail in the coffin about loose machine placement theories.
There is no correlation between long-term payback and hit frequency. A low hit frequency machine can have a high long-term payback. High hit frequency machines, in addition, can have lowlong-term paybacks. Larry Mak, author of Secrets of Modern Slot Playing, recently queried the Nevada Gaming Control Board to find out the payback reported on penny machines. The Board said itwas 90.167%. Most of the penny video slots have very high hit frequencies, yet the overall average long-term payback is very low.
The usual reasoning behind putting loose machines in highly visible areas is so slot players can see other players winning. Maybe we should be more precise here and say that players will seeother players hitting and assume that they are winning because they are playing loose machines. But because there’s no correlation between hit frequency and long-term payback, these players canactually be playing machines with low long-term paybacks.
I don’t put much stock in loose machine placement theories, but I do believe slot directors may follow a hit frequency placement philosophy. Slot directors may try to place high hit frequencymachines in visible areas to encourage play. This philosophy says and implies nothing about the long-term payback of the machines.

John Robison is the author of 'The Slot Expert's Guide
to Playing Slots.' His website iswww.slotexpert.com

If you have a slot machine or you have bought one old used vintage slot machine and want to have some fixes to get it work then obviously you will think you need a machine technician. Many of you will even think of taking it to some repair station to get things done. But here in the guide you will find some of the repairs that you yourself can do with your slot machine and you need not need to join machine technical repair training school.

Like any other machines Slot machines too are a blend of electronic and mechanical components, that wear with age and require routine repairs. Before you begin to repair yourself do note that every slot machine that you have purchased whether old or new comes with installation and user guide manual. You need to read that many a times until you are familiar with each components and parts of the slot machine and understand thoroughly as how the slot machine works.

In your guide to repair slot machines you will find some common repairs that can be carried out by you, some videos to watch as well. If your slot machine has some complex issue then obviously you require a qualified technician.

Changing the Top Florescent Light

The top florescent light bulb is easily changed by following these simple procedures. The replacement bulb is an F15T8/CW 18″ 15 Watt bulb which is available at most hardware and department stores or may be purchased online at Ebay or Amazon or realslotmachinesforsale under the category ‘parts of slot machine’.

• Open the main slot machine door and ensure the door is fully open. Turn off the power to the slot machine. The power switch can be found with the main door open about midway down on the right side just inside the machine.
• If the machine is equipped with a top ticket printer, you must pull the bottom of the printer out far enough to see where the ticket paper is located, and note the area large enough to place a couple of your left fingers under.

• Remove the top metal trim strip which is a cover plate to the right of the ticket printer and/or is located along the bottom of the top glass. There are a couple of clips on the back of the metal trim strip that fit into notches on metal bracket which holds the top glass. The metal trim strip should be lifted upwards and outwards to remove.
• Once the metal trim strip is removed, the next step is to remove the top glass. Note that some top metal trim strips have a slot in the top that holds the top glass and they must be removed very carefully as to not damage or drop the top glass.

• You can now see the top glass is held in place by usually two or three clips that rise above the metal bracket behind the top metal trim strip. Now slowly lift up on the top glass from both bottom edges until the top glass until it is high enough to gently pull it forward and allowing it to slide down and away from the top track and clips holding it in place.
• Once the top glass has been removed, put it somewhere where it will not get knocked over or broken. You will see the florescent bulb in the middle of the top box area of the machine. Care should be taken removing the bulb as it may be very hot. Remove the old bulb by twisting the florescent tube about a quarter to half turn allowing the two prongs on the bulb to slide out of the fixture on both sides of the bulb.

• Remove and discard the old bulb. To install the new bulb, align the two prongs on each side of the florescent tube with the slits on each fixture in the top box of the slot machine. Twist the bulb into place normally using about a quarter to half of a turn. If the bulb is not secure or aligned, repeat the procedure.
• If your slot machine is an IGT S Plus machine, it is equipped with a florescent bulb starter. Then you can replace the starter when replacing the florescent light bulb. The starter is an FS-U Universal Starter. They are available at most hardware and department stores or may be ordered online too. The starter for the top florescent bulb on an IGT S Plus machine is located directly behind the florescent bulb fixture on the left side of the slot machine in the top box area.
• It is replaced by twisting about a quarter to half a turn as it is held in place with a bayonet type mount. Remove the old starter and discard. Replace with a new FS-U Universal Starter by aligning the two pins on the bottom of the starter with the notches in the starter receptacle, pushing it up into the starter socket, and then twisting it a quarter to half a turn into place.
• Prior to re-installing the top glass, turn the power switch on the right inside of the machine on to verify the bulb works properly. If it does not, turn the power off and check that the bulb is properly installed and secure. If replacing a starter, check that it is also properly installed and secure.
• After verifying the bulb is working, it is now time to replace the top glass. If your slot machine has a top ticket printer, ensure the ticket printer is still pulled out so you can place your fingers in the opening while replacing the top glass.
• Carefully and slowly lift up the top glass placing each hand under the bottom of the top glass. Slide it into the upper edge track on the top box of the slot machine carefully lifting it so it slides into the tracks while being able to push the top glass back far enough to clear the two or three raised clips on the metal bracket where the top glass holding track is located.
• Gently and slowly lower the top glass behind the clips so as to allow them to hold the glass in place. If properly secured, the top glass will not be able to slide down or out of its position. Keep a secure hold on the top glass until you are certain it is secured in the proper position.
• Replace the top metal trim strip by aligning the two or three hooks the back through the metal bracket that supports and holds the top glass. Once the hooks on the back are in place, gently push the top metal trim strip down and it should snap into place. If you have a slot machine with a top ticket printer, close it tight into position. Close the main slot machine door and you are ready to play.

Changing the Belly Glass Florescent Light

The belly glass florescent light bulb is easily changed by following these simple procedures. The replacement bulb is an F15T8/CW 18″ 15 Watt bulb which is available at most hardware and department stores or may be bought online as spare parts of slot machine.

• Open the main slot machine door. Turn off the power to the slot machine. The power switch can be found with the main door open about midway down on the right side just inside the machine.
• Facing the slot machine door, look on the right side of the door just around from bill acceptor area. You will see a knob sticking out that is approximately the size of the end of a regular pencil. This knob when pulled out releases the slot machine belly glass assembly (belly door) to fold down so the bulb can be accessed.

• There are a couple of very important thing to remember prior to pulling this knob to release the belly door. First try pulling gently on the knob. If it does not allow you to pull out and you have a lock installed directly above it, the lock must unlocked in order to allow the release knob to pull out. When pulling out the release knob, be ready for the belly door to fold down.
• Most of the time you must lightly pull on both sides of the belly door to get it to fold down, however always place your hand under it so it does not fall down too quickly causing the belly glass to break or crack.
• Once the belly door is in the down position, you will see the access to the florescent bulb bracket that is held in place by a small Phillips screw. Remove the screw and place it the coin tray so it will be handy when you need it after replacing the bulb.

• The long metal bracket that holds the florescent bulb must be slid slightly right or left so as to be able to lift it out of the belly door. Gently lift the metal bracket with florescent bulb out of the assembly far to be able to turn it over to replace the bulb. Be cautious as the bulb could still be hot!
• Grasp the metal bracket holding the florescent bulb and remove the old bulb by twisting the florescent tube about a quarter to half turn allowing the two prongs on the bulb to slide out of the fixture on both sides of the bulb.

• Remove and discard the old bulb.To install the new bulb, align the two prongs on each side of the florescent tube with the slits on each fixture that is on each side of the new bulb. Twist the bulb into place normally using about a quarter to half of a turn. If the bulb is not secure or aligned, repeat the procedure.
• Now turn the metal bracket that holds the newly installed bulb over and back into position in the belly glass assembly. Slid the bracket slightly right or left into position and replace the small screw which holds the metal bracket in place.
• If your slot machine is an IGT S Plus machine, it is equipped with a florescent bulb starter. So you need to replace the starter a well when replacing the florescent light bulb. The starter is an FS-U Universal Starter. They are available online and you can purchase one.
• The starter for the belly glass florescent bulb is located on the back of the main slot machine door on the lower right hand corner as you face the back of the door.

• It is replaced by twisting about a quarter to half a turn as it is held in place with a bayonet type mount. Remove the old starter and discard. Replace with a new FS-U Universal Starter by aligned the two notches on the bottom of the starter, pushing it into the starter socket, and then twisting it a quarter to half a turn into place.
• Prior to closing the belly glass door, turn the power switch on the right inside of the machine on to verify the bulb works properly. If it does not, turn the power off and check that the bulb is properly installed and secure. Also check to ensure the starter is properly installed and secured.
• Lift the belly glass assembly up and push it into place in the slot machine door. Ensure the belly glass door snaps into place and the knob on the side of the door is in its normal position. It is spring loaded so as to not allow the belly glass assembly to open unless it pulled. If the belly door appears to be in place, pull on both sides of the belly door to make sure it is locked and secure.
• If you unlocked the lock above the knob, re-lock it. Close the main slot machine door and you are ready to use your slot machine.

Changing the Push Button Bulbs

All of the slot machine’s push button lights such Play Max Credits, Spin Reels, Bet One Credit, etc. are easily replaced by following this simple procedure. The replacement bulbs are #161 on IGT S2000 machines and #555 on IGT S+ machines and may be purchased from online stores.

• Fully open the slot machine door. Look on the backside of the door. Each push button will extend down from the shelf on the door and will have a small wire bundle going to it. Identify which push button bulb needs to be replaced.
• Carefully pull down on the bottom of the push button area that is normally white and is where you will see wiring connected. Using your thumb and two fingers, pull straight down and the bottom portion of the push button should snap out.

• You will now be able to see the bulb in the top area of the lower push button assembly. Use caution as the bulb may be very hot. Pull the wedge bulb out and discard it. Notice the slot in which the bulb located.
• Place a new bulb in the slot noting the direction of slot ensuring the new wedge bulb is inserted so as to line up in the slot. Push the new bulb into place.

• Replace the bottom of the push button assembly by inserting it into the top portion of the push button assembly. The bottom portion will snap into position. Ensure that none of the wire connections have been accidentally knocked loose on the bottom of the push button. Note the push button light will not illuminate until the slot machine door is closed. Close the main slot machine door and you are ready to play.

Changing the Small Panel Lights

The small panel lights that illuminate the denomination amount and other areas behind the glass are easily changed. For denomination amount lights on the IGT S2000, a #73 bulb is needed and a #86 bulb is needed on the IGT S+ slot machines. They may be bought online from slot machine selling sites.

Here it is described as how to change the lights behind denomination amounts such as .25 Cents. Other small panel light bulbs are changed in the same manner.

• Fully open the slot machine door. Look on the backside of the door. Note the location where the denomination amount would be located near the center just below the slot machine’s center glass. The area will appear to be flat with a small bulb holder projecting out that is slightly larger in diameter than a regular pencil and is flat on two or four sides.

• This bulb holder is removed by simply twisting it a quarter to half a turn and then gently pulling it out of its socket. It is held in place by somewhat of a bayonet type mount.
• Once the bulb holder is removed, pull the wedge bulb out of the socket and discard the old bulb. Caution should be taken as the old bulb may be very hot. Replace the bulb by firmly inserting a new bulb into the socket of the bulb holder being careful to align the wedge bulb correctly into the slot.
• Take the bulb holder and look for two notches on each side of the opening where the bulb holder is inserted. Note there are two notches on the bulb holder. Align the notches inserting the bulb holder into the panel.
• Gently twist the bulb holder about a quarter to half a turn to lock it into place. Verify the bulb is illuminating, and if not repeat the procedure using a different new bulb. Now close the main slot machine door and ready to use.

Cleaning Your Slot Machine

This is common thing and all you need is usually nothing more than a damp cloth to clean the exterior cabinet of your slot machine. Never use any abrasive or ammonia based cleaners on the cabinet of the machine.

The slot machine top, center and belly glasses may all be cleaned on the outside by using a window cleaner. However if you own a slot machine with a frosted exterior glass or one that has any exterior decorated markings such as stars, a window cleaner should not be used as the cleaner may damage the exterior images. Care should be taken cleaning interior glass as a cleaner and cloth may damage labels or markings.

The inside of the slot machine should not require cleaning other than occasionally removing dust. This can normally be done with a damp clean cloth, however ensure the power switch has been turned off prior to cleaning.

When wiping dust inside your machine, be careful not to loosen any wires or connections. Do not use a damp cloth on the face of your reel strips as the playing symbols on the reel strips could come off or become torn. Also be very careful not to touch the back side of your reel strips with a damp cloth especially if the back sides of the reel strips are black. This can cause damage to this type reel strip.

When your Slot Machine Doesn’t Power On

When you get a slot machine and wish to locate or set up at your place, determine the household 120V AC outlet you are planning to use has power. Keep in mind some outlets are controlled on and off by a wall switch.

• With the slot machine unplugged from the outlet and surge protector, open the slot machine main door. Remove the coin tray by lifting up and pulling out the tray. Simply pull it out and down to remove the tray.

• The hopper is on the bottom floor of the machine and slides out on two base rails along two metal guides. Slide the hopper out slowly by grasping the handle with your left hand and supporting the hopper with your right hand. Do not use the black hopper bowl to pull the hopper out of the slot machine.
• On the lower right corner of the slot machine you should see the black power cord coming into the machine. The power cord plugs into the Power Distribution Unit which is located on the back wall of the slot machine.
• Verify the power cord is firmly plugged into place into the right side of the Power Distribution Unit.

• Place the hopper back into the slot machine making sure it slides in easily and completely with the base rails on hopper guides on the bottom of the machine. The hopper plugs into a receptacle toward the back of the machine. It is designed to fit in easily without using excessive force.
• The coin tray can be easily put back into place by ensuring the alignment pins on the coin tray match up to the top alignment holes on the bottom side of the machine. The tray should be pushed down into place. Make sure the tray is even when pushed into place. If the coin tray is not aligned and even, remove the coin tray, and repeat the procedure.
• Verify the power cord is firmly plugged into a good surge protector. Plug the end of surge protector into the outlet you have verified is good, and make sure the on/off switch on the surge protector is turned on.
• Now turn the power switch on the inside right of the slot machine to the on position and verify the slot machine is powered on by lights illuminating.

Jackpot Payout Reset

When your slot machine just hit a 25,000 credit Jackpot it now needs to be reset to continue playing. Depending on the model slot machine you have and the amount of the payout will determine the best course of action.

If you have an IGT S+ Slot Machine and your win is under the maximum payout amount specified on the center glass of the machine, the hopper may run out of coins or tokens. This is normally displayed by Error Code 3300. In this case it usually a simple matter of taking the coins or tokens that have been paid out and putting them back in the hopper allowing it to fully pay out. However, if you won a large jackpot that is “hand pay out”, then follow the steps below.

• First open the main slot machine door. Locate the Jackpot Key which is normally kept inside the slot machine in a plastic envelope on the side of the cash box. If you do not find it inside the machine, often times the Jackpot Key will be strapped with the main slot machine door key. It is a small key as pictured below.
• Take the key in hand and locate the jackpot reset which is a keyhole located on the right side of the slot machine. It is normally about two-thirds up from the bottom of the machine.

• Insert the Jackpot Reset Key into the keyhole. Turn the key only one quarter turn to the right. This will reset the machine, and once you close the main slot machine door, you will be ready to resume play.
• Note that if you turn the Jackpot reset key multiple times you may place your slot machine into a test mode and will thus delay your ability to continue playing.

Some of the Error Codes you get on Slot Machine

Error Code 3300 (IGT S+ Machines)

Simply put Error Code 3300 is normally telling you your hopper is low on or completely out of coins or tokens.

Open the main slot machine door. Look into the hopper. If it is empty or has just a few coins or tokens, place about 500 coins or tokens back into the hopper. Close the main slot machine door. In a few moments you should hear the sound of the hopper’s motor turning and soon the remaining coin payout will begin.

Error Code 3100 (IGT S+ Machines)

Error Code 3100 (Extra Coin Out Tilt) normally signifies either a jammed/stuck coin or token in the coin-out chute on the hopper, or the hopper coin-out sensor has detected the hopper may have paid out an extra coin.

• Open the main slot machine door. Remove the coin tray by lifting up and pulling out the tray. Simply pull it out and down to remove the tray.
• The hopper is on the bottom floor of the machine and slides out on two base rails along two metal guides. Slide the hopper out slowly by grasping the handle with your left hand and supporting the hopper with your right hand. Do not use the black hopper bowl to pull the hopper out of the slot machine.
• Inspect the hopper to determine if any coins/tokens appear to stuck or jammed in the hopper knife or the hopper coin-out channel.
• If a coin appears to be stuck or jammed, empty the hopper of coins/tokens for easier access to clearing the jammed coin/token.
• Once the stuck or jammed coin has been removed, place the hopper back into the slot machine making sure it slides in easily and completely with the base rails on hopper guides on the bottom of the machine. The hopper plugs into a receptacle toward the back of the machine. It is designed to fit in easily without using excessive force
• Refill the hopper with the proper size coins or tokens. The coin tray can be easily put back into place by ensuring the alignment pins on the coin tray match up to the top alignment holes on the bottom side of the machine. The tray should be pushed down into place. Make sure the tray is even when pushed into place. If the coin tray is not aligned and even, remove the coin tray, and repeat the procedure.
• Close the main slot machine door. The error code should be gone and the machine is ready to play.

Error Code 12 (IGT S+ Machines)

Slot Machine Noise Cling

The 3.6 volt battery on the slot machine CPU Board normally lasts for years. However when an Error Code 12 is displayed, this is an indication the battery voltage has dropped below 2.9 volts and is now a low battery.

It is recommended to replace the battery as soon as possible. They can be purchased online from ebay, amazon or realslotmachinesforsale. When ordering a replacement battery, they will provide you with detailed instructions on how to change this battery which is located on the slot machine’s CPU Board.

In order to reset Error Code 12 temporarily, simply open and close the main slot machine door. It is important not to wait for a long time to replace the battery as data stored on the RAM may be lost. Replace the battery Asap.

Following are some of the other error codes that might interest you to solve your problem in repairing the slot machine

Slot Machine Sfx

Hopper is Full and Coins Go Down a Chute to Bottom of Machine

Slot machines that accept coins were designed this way because when used constantly on the casino floor, hoppers could quickly fill. There is a coin level probe on side of the hopper that looks like a brass screw sticking inward toward the hopper bowl. This probe detects when coins/tokens are at a selected level, and will cause the subsequent coins/tokens played to go down a chute to the bottom of the slot machine.

Provided your slot machine sets on a regular casino slot machine stand with holes in the top and the holes are aligned with the slot machine, those coins which bypassed the hopper will go down the chute, through the hole in the bottom of the machine, through the hole in the top of the stand, and into the open area in the stand cabinet. As casinos have done for years, place a small plastic tub in the slot machine stand cabinet to collect these excess coins.

Retrieving Currency from the Cash Box

Slot Machine Noises

Though not all slot machines are equipped to accept currency in order to comply with certain laws but if your slot machine is equipped with a bill acceptor, bill transport and cash box, the bills in the cash box can easily be retrieved.

Free Slot Machine Sounds

• Open the slot machine main door. The cash box door is located just under the yellow chute for the bill acceptor. Ensure the cash box door is fully open.
• On the right side of the cash box toward the top is a release level. Push release lever down and pull the cash box straight out toward you. If the cash box seems difficult or impossible to pull out, make sure you have pushed the release lever down.

• Hold the cash box in both hands and turn it upside down. Notice on the bottom of the cash box is a door which has two small finger sized holes on one side. Normally the door is held closed by a small piece of electrical tape so the bottom cash box door doesn’t come open while removing it from the cash box chassis of the slot machine.
• While holding the cash box with the bottom door up toward you, open the door and you will see where the bills are stored. The large spring expands as more and more bills are added to the cash box. Remove the bills by pulling them straight out.
• Close the bottom door of the cash box and re-secure the door using the same small piece of electrical tape. Turn the cash box around to the original position when you removed it from the slot machine.
• Align the flat top of the cash box with the flat surface at the top of the cash box chassis from which you removed it. Slide it firmly into place. Now close the cash box door and the main slot machine door and you are ready to use it for gaming.

Slot Machine Sounds

All the content, graphics and videos in this post have been gathered by research for you from various online sources and hope this helps you as a guide to repair your slot machines. Note that many guide books and manuals too are there for you to buy from online stores which are handy to know as how to repair your slot machines. Just stay tuned at realslotmachinesforsale and know many more interesting information about slot machines.